Embedded Systems course Expert level by Skubotics

Here is a brief overview of the Course breakdown according to classes. Each Class is extended uniformly over two days.

Class I
=====
1. Introduction to Microcontrollers
2. Getting Started with Arduino
3. Anatomy of Arduino and its competitors
4. Getting Familiar with Arduino IDE
5. Using the GPIO pins on Arduino

Class II
======
1. Sensor and ADC interfacing
2. Serial Interfacing
3. Designing a sensor (IR, LDR)
4. Getting familiar with sensors such as Ultrasonic and Accelerometer

Class III
======
1. Using a Matrix Keypad
2. Using Temperature Sensor
3. Using an Ultrasonic Sensor
4. Special Class on Hands on Soldering : Do s and Dont s

Class IV
======
1. Interfacing of Motor
2. Project 1: Building a Line Following Robot
3. Project 2: Building a Light Following Robot

Class V
======
1. Using an LCD
2. Using a 7 segment
3. Serial Printing on Display

Class VI
======
1. Using HC-05 Bluetooth module
2. Using GSM Module

For further details download the information brochure attached within.