Cisco CCNA course for Working professional by ACME ACADEMIA

CCNA

Basics of Networking
o Network Vs Networking
o Internetworking Basics
o Addresses
o Logical Address (i.e. IP Address)
o Physical Address (I.e. Mac Address)
o Network Devices
o HUB
o Bridges
o Switches
o Routers
o Collision Domain and Broadcast Domain
o Internetworking Models
o ISO-OSI Model (Layered Architecture)
o TCP/IP and the DOD Model
o Ethernet Networking
o Carrier Sense Multiple Access with Collision Domain (CSMA/CD)
o Half and Full Duplex Ethernet
o To create Ethernet (Cat. 6) wire- RJ45
o Straight Wire
o Cross Wire
o Protocols and Port Numbers (FTP, Telnet, TFTP, NFS, SMTP, LPD, X window, SNMP, DNS, DHCP,
BootP, TCP, UDP, IP, ICMP, ARP, RARP, Proxy ARP etc.)
o IP Address Classification on the basis of Classes and Host IDs and Network IDs.
o Subnetting
o Straight Length Subnet Mask (SLSM)
o Variable Length Subnet Mask (VLSM)
o Classless Inter Domain Routing (CIDR)

Practicals on Router
o
o Getting Familiar with IOS Interface
o Connecting to a CISCO Router
o Connection through Console Port
o Connection Through Auxiliary Port
o Telnet
o Router Administrative Configurations
o Host Names
o Banners
o Passwords
o Interface Descriptions
o Router Modes
o Router Basics Commands (Show version, Getting first Screen, Sh running-Config, Erase Start, Sh IP int brief, Copy Run start, write memory, Erase startup-config, Reload, sh Flash, sh History)
o Basic important commands (description Command, do command, Secondary IP to interface, pipe command, cdp commands, debugging commands, show process Commands)
o Setting Passwords to secure CISCO Router
o At Console
o Auxiliary
o Telnet (VTY) (username and Password)
o Privileged mode ( enable password, enable
secret)
o Password Encryption
o Assigning IP address to Fast Ethernet Ports and Serial Ports.

IP Routing
o Static Routing
o Default Routing and Wild Card Masking
o Dynamic Routing ( Interior Gateway, Exterior
gateway)
o Autonomous System and Administrative
Distances
o Routing Protocols (Theory + Practicals)
o Distance Vector (RIP, RIP v.2, IGRP, EIGRP)
o Link State (OSPF)
o Hybrid (EIGRP)
o Use of Loopbacks and Advantages.
o Comparison bet RIP v.2, EIGRP and OSPF
o Redistribution (RIP EIGRP, EIGRP-OSPF, RIP- OSPF, EIGRP-OSPF)
o Access Control Lists (Mitigating Security Issues with ACLs) using Wild card Masking
o Standard Access Lists
o Extended Access Lists
o Naming ACL
o Network Address Translation (NAT)
o Static NAT
o Dynamic NAT
o NAT Overloading or Port Address Translation (PAT)
o Frame Relay Concepts and Configuration

Practicals on Switches

o Address Learning, Forward/ Filter Decisions, Loop Avoidance
o Spanning Tree Protocol (STP)
o Configuring Catalyst Switches
o Creating Virtual LANs (VLAN)
o Static VLANs
o Dynamic VLANs
o VLAN Trunking Protocol (VTP)- To share
Information between VLANs
o VTP Modes and VTP Pruning
o Routing between VLANs
o Telnet in Switch
o Port Security
o Verifying CISCO Catalyst Switches