Cisco CCNA Routing & Switching course for graduates by Skyway Technologies

1. Internet working
The Layered Approach
The OSI Reference model
Ethernet networking
Ethernet Cabling
Wireless Networking
Data Encapsulation

2. Internet Protocol
TCP/IP and DoD Model
IP Addressing
Binary to decimal and hexadecimal
Conversion
Introduction to network address
Translation (NAT)

3. IP Sub netting and Variable Length Subnet Masks (VLSM)
Sub netting basics
VLSM
Troubleshooting IP addressing

4. Introduction to the Cisco IOS
The CISCO router user interface
Command-line interface
Viewing and saving configurations

5. IP Routing
Routing basics
Routing Protocol basics
Routing Information protocol (RIP)
Interior gateway routing protocol (IGRP)

6. Enhanced IGRP (EIGRP) and open shortest path first (OSPF)
EIGRP features and operation
Protocol-Dependent modules
Neighbor discovery
Reliable transport protocol (RTP)
Diffusing update algorithm (DUAL)
Router discovery and maintenance

7. Layer 2 Switching
Switching services
Bridging Vs. Switching
Spanning tree protocol (STP)
LAN switch types
Configuring the catalyst 1900 switches
8. Virtual Lans (VLANs)
VLAN basic
VLAN membership
VLAN Trunking protocol
Configuring VTP
9. Managing a Cisco Internetwork
Managing configuration Registers
Backing up and restoring the Cisco IOS
Backing up and restoring the Cisco configuration
Using Cisco discovery protocol (CDP)
Using Telnet resolving hostnames

10. Managing traffic with access lists
Standard Access list
Extended access list
Names access lists

11. Wide Area Networking protocols
DTE & DCE
HDLC
PPP
Frame Realy
ISDN
DDR
Describe VPN technology
Troubleshoot WAN implementation issues
Configure and troubleshoot NAT for given network requirements
Configure and apply ALs based on network filtering requirements
Identify common issues with implementing wireless networks
Configure verify and troubleshoot DHCP and DNS operation on a router
Explain switching concepts and technologies